VAR2:=LLV(LOW,10);
VAR3:=HHV(HIGH,25);
動力線:= EMA((CLOSE-VAR2)/(VAR3-VAR2)*4,4);
趨勢:=MA(動力線,3);
出擊:(趨勢>REF(趨勢,1)) AND (REF(趨勢,1)<REF(趨勢,2)) AND (趨勢<1);

VAR2:=LLV(LOW,10);
VAR3:=HHV(HIGH,25);
動力線:= EMA((CLOSE-VAR2)/(VAR3-VAR2)*4,4);
底部:=0.2;
關注:=0.5;
笑臉:FILTER(CROSS(動力線,關注),20) OR FILTER(CROSS(動力線,底部),20);

VAR2:=LLV(LOW,10);
VAR3:=HHV(HIGH,25);
動力線:= EMA((CLOSE-VAR2)/(VAR3-VAR2)*4,4);
底部:=0.2;
關注:=0.5;
笑臉:=FILTER(CROSS(動力線,關注),20) OR FILTER(CROSS(動力線,底部),20);
趨勢:=MA(動力線,3);
出擊:=(趨勢>REF(趨勢,1)) AND (REF(趨勢,1)<REF(趨勢,2)) AND (趨勢<1);
綜合:笑臉 AND 出擊;
{無未來函數,上面共三個公式,復制可用}

以下是出現見底黃色信號時的選股公式（順便提醒你一下這個公式含有未來函數，看視很準確的底部出擊信號，其實行情走了一段以后才出現的買點，慎用！）：
VAR1:=SMA(MAX(CLOSE-REF(CLOSE,1),0),34,1)/SMA(ABS(CLOSE-REF(CLOSE,1)),7,1)*100;
VAR2:=SMA(MAX(CLOSE-REF(CLOSE,1),0),13,1)/SMA(ABS(CLOSE-REF(CLOSE,1)),13,1)*100;
VAR3:=BARSCOUNT(CLOSE);
VAR4:=VAR1<20 AND VAR2<23 AND VAR3>35;
VAR5:=VAR4 AND COUNT(VAR4,1)=1;
VAR6:=EMA(CLOSE,21)-EMA(CLOSE,8);
VAR7:=EMA(VAR6,5);
VAR8:=TROUGHBARS(3,6,1)<4 AND CROSS(VAR6,VAR7);
VAR9:=(HIGH+LOW+CLOSE)/3;
VAR10:=IF(TROUGHBARS(3,16,1)=0 AND HIGH>LOW+0.04,4,0);
VAR11:=(VAR9-MA(VAR9,14))/(0.015*AVEDEV(VAR9,14));
見底:=VAR10;
XG:VAR11<-110 AND 見底>0;

朋友，以下是你要的選股公式：
V1:=EMA(CLOSE,60)-EMA(CLOSE,300);
V2:=EMA(V1,300);
V3:=(CLOSE-LLV(LOW,8))/(HHV(HIGH,8)-LLV(LOW,8))*100;
V4:=SMA(V3,2,1);
V5:=SMA(V4,2,1);
V6:=CLOSE/REF(CLOSE,3)>=1.1;
V7:=BACKSET(V6,3);
ZM:V7 AND COUNT(V7,3)=1;

RSV:=(((CLOSE
-
LLV(LOW,33))
/
(HHV(HIGH,33)
-
LLV(LOW,33)))
*
100);
神仙:=SMA(RSV,7,1);
XG:=CROSS(神仙,20);
｛個人看法。僅供參考。｝

N:=74;
上升通道:=DRAWLINE(L<=LLV(L,10),LLV(L,10),H>=HHV(H,10),H,0);
下降通道:=DRAWLINE(H>=HHV(H,10),H,L<=LLV(L,10),LLV(L,10),0);
抄底建倉:=IF(上升版通道>REF(上升通道,1),上升通道,N);
CROSS(上升通道,-24);
{DRAWLINE在賦值后就是通達信特有未權來函數};

DIFF:=(EMA(DCLOSE,5)-EMA(DCLOSE,20))*100;
DEA:=EMA(DIFF,5);
ZZ:=CROSS(DEA,DIFF);
ZZ1:=CROSS(DIFF,DEA);
XG:ZZ OR ZZ1;
紅箭頭抄｛襲ZZ｝綠箭頭｛ZZ1｝就是這兩點。｛僅供參考。｝

這個指標其實沒什么意思，本質是MACD而已，紅色箭頭是MACD金叉買點，綠色是死叉賣點。因為要標明“二次”，指標信號必須漂移。
指標系統自帶的可以直接調用。

學會看均線，和系統自帶的MACD就行，不要什么公式